Is Your Hotend Leaking?
3D Printers, and their users, depend on a reliable hot end for quality prints. There are many ways a hot end can cause issues and endless tinkering. One of the most common issues 3D printer users experience is a hot end that leaks. This happens when melted filament exits, or leaks, from the hot end before exiting the nozzle.
This is a very frustrating experience, and can cause ruined prints when the excess melted PLA or other filament material drips onto the bed area and the print itself. The best way to avoid this all-too-common problem is to select a hot end with the least potential for leaks.
What To Look For When Buying A Hotend?
When purchasing a new hot end, it is important to examine the design of its filament path. The filament path is the interior part, or parts, of the hot end which contain the filament and guide it from extrusion, to the melt chamber and finally through the nozzle.
Many pre-assembled 3D-printers, especially cheap Chinese "clones," include all-metal hot ends with a complex, multi-part filament path. What this means is that filament has an opportunity to leak from the joints between these parts such as where the threaded heat-break threads in to the heater block. This form of construction is usually done to lessen cost to the manufacturer, but results in headaches for the user, you! Complexity is not always good, and when it comes to hot end filament paths, elegance is key.
Hotends.com understands that an elegant, seamless filament paths are the only way to make a hot end leak-proof. This is why every J-Head includes a unique one-piece path from the time the filament enters to the hot end until it reaches the nozzle. No threaded heat break means no leaks.. and that means more hassle-free printing for you.
Buy a Genuine J-Head and experience the difference of tinker-free, professional 3D-printing today.